Skip to main content
Log in
05KR-6H-P — JST product photo
JST

JST 05KR-6H-P KR Series Socket, 5-Pos IDC 26 AWG Tin

MPN05KR-6H-P
Active

JST KR series IDC socket, 05KR-6H-P, 5 positions, 1 row, 0.079" (2.00mm) pitch, female socket, tin contact finish, 26 AWG, free hanging in-line mount, bulk.

$0.4200Ref. price · indicative, final on quote
05KR-6H-P datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

05KR-6H-P Technical Specifications
ParameterValue
SeriesKR
Wire typeDiscrete
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeSocket
Wire gauge26 AWG
Cable terminationIDC
ColorGray
Pitch0.079\" (2.00mm)
PackageBulk
Contact finishTin
Rows1
Positions5

Product details

JST KR Series IDC Socket — 5-Position, 2.00 mm Pitch

The JST 05KR-6H-P is a 5-position IDC socket in the KR series, designed for mass-termination of 26 AWG discrete wire without stripping or crimping.

Mating Header and Wire Termination

This socket mates with the corresponding KR series pin header — the header's 0.079" (2.00 mm) square pins align with the IDC contact beams. IDC termination requires a simple press tool — no crimp die to swap, but the wire gauge is fixed at 26 AWG; 24 AWG is outside the listed spec and may not seat reliably in the slot.

The gray housing and bulk packaging are standard for this series; no special lead-time or allocation constraints are reported. For volume requirements, confirm the BOM circuit count and mating header part number at quote time.

Frequently asked questions

What header mates with JST 05KR-6H-P?

The 05KR-6H-P mates with the corresponding KR series pin header at 0.079" (2.00 mm) pitch. The header part number depends on the circuit count and mounting style — confirm the mating half against the harness design.