Skip to main content
Log in
06ZR-3H-P — JST product photo
JST

JST 06ZR-3H-P Receptacle, 6-Pos IDC, 1.50mm Pitch, Tin

MPN06ZR-3H-P
Active

JST ZR series receptacle, 6 positions, 1 row, 0.059" (1.50mm) pitch, IDC termination, tin contacts, free-hanging, natural housing, 30 AWG discrete wire.

$0.5200Ref. price · indicative, final on quote
06ZR-3H-P datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

06ZR-3H-P Technical Specifications
ParameterValue
SeriesZR
Wire typeDiscrete
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge30 AWG
Cable terminationIDC
ColorNatural
Pitch0.059\" (1.50mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions6

Product details

JST 06ZR-3H-P: 6-Position IDC Receptacle for 30 AWG Wire Harnesses

The JST 06ZR-3H-P is a 6-position receptacle from the ZR series, designed for mass-terminating 30 AWG discrete wire using an IDC (insulation displacement contact) termination. The natural-colored housing is a free-hanging (in-line) design with a closed end, meaning the back of the connector is sealed against wire entry from the rear — a detail that matters when routing discrete wires in a harness where only one entry direction is intended.

The 1.50 mm pitch (0.059") determines the footprint spacing on the mating header. The IDC termination works with 30 AWG discrete wire.

Mating and Compatibility

The free-hanging mount means the receptacle sits on the wire harness, not on the board; the header is the board-mounted half.

Frequently asked questions

What wire gauge does 06ZR-3H-P support?

The 06ZR-3H-P is designed for 30 AWG discrete wire, terminated via IDC. Using any other wire gauge risks a poor connection because the IDC slot geometry is matched to that diameter.

What is the pitch of 06ZR-3H-P?

The pitch is 0.059" (1.50 mm). This is the center-to-center spacing of the contacts and determines the footprint on the mating board-mounted header.