9-Position IDC Receptacle for 26 AWG Harnesses
The JST 09HR-6S-P-N is a 9-position, single-row IDC receptacle from the HR series, designed for mass-termination of 26 AWG discrete wire without individual crimping. The closed-end design prevents stubbing during blind mating in confined enclosures.
No crimp tool or loose terminal is needed; the assembly is a single-step press operation. The 26 AWG wire gauge is fixed by the slot geometry, so stick to that size for a reliable gas-tight connection. The free-hanging (in-line) mount suits harness sub-assemblies that route between boards or through a chassis wall.
Mating Compatibility and Locking
The 09HR-6S-P-N mates with the JST SHR-06V-S series header housing (same 2.50mm pitch, 9 circuits). The detent lock on the receptacle engages a ramp on the header shroud — the audible click is the lock snapping into place. For wire-to-board applications, the header is through-hole or SMT; for wire-to-wire, a second IDC receptacle on the opposite harness works as long as both are the same series and position count. The natural colour (unpigmented nylon) is standard for the HR series and has no effect on electrical performance.
No official cross-reference or replacement part is listed for this order code, so the BOM line should reference this exact MPN.