Skip to main content
Log in
10SR-3S — JST product photo
JST

JST 10SR-3S SR Series Receptacle, 10 Pos, 1.00mm Pitch, IDC

MPN10SR-3S
Active

JST SR Series, 10 Position Receptacle, 0.039" (1.00mm) Pitch, 1 Row, IDC, 30 AWG, Tin, Free Hanging, Natural

$0.7000Ref. price · indicative, final on quote
10SR-3S datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

10SR-3S Technical Specifications
ParameterValue
SeriesSR
Wire typeDiscrete
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge30 AWG
Cable terminationIDC
ColorNatural
Pitch0.039\" (1.00mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions10

Product details

The natural nylon housing carries a closed end, which means the wire can't push through the back of the connector and short against a panel or another assembly. Tin contacts are standard for this class; they handle the duty cycle of a consumer or office-equipment interconnect where reconnection is infrequent.

Wiring and Termination — What Works

This connector is specced for 30 AWG discrete wire only. The IDC termination requires a bench press or hand tool.

The 11SR-3S is the 11-position sibling in the same SR series, sharing the same 0.039" (1.00mm) pitch, IDC termination, 30 AWG wire spec, and tin contact finish. If your BOM calls for 10 positions, the 10SR-3S is the match; the 11SR-3S is a different part number and won't fit an 11-position header into a 10-position footprint.

No last-time-buy pressure here — it's available through normal distribution.

Frequently asked questions

What is the pitch of the JST 10SR-3S connector?

The pitch is 0.039" (1.00mm). That's the center-to-center spacing of the contacts, which sets the board footprint for the mating header.

Is the 10SR-3S RoHS compliant?

Yes, it is ROHS3 Compliant per the lifecycle record.

Does the 10SR-3S require a special tool for termination?

Yes, IDC termination requires a bench press or hand tool to push the cover down and drive the tines through the insulation. It is not a hand-crimp operation.