Skip to main content
Log in
11HR-6S-P-N — JST product photo
JST

JST 11HR-6S-P-N HR Series IDC Receptacle, 11 Pos, 2.50mm

MPN11HR-6S-P-N
Obsolete

JST HR Series, Receptacle, 11 Positions, 0.098" (2.50mm) Pitch, 1 Row, IDC, Tin, Detent Lock, Free Hanging, Natural.

$0.4600Ref. price · indicative, final on quote
11HR-6S-P-N datasheet
StockContact for availability
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

11HR-6S-P-N Technical Specifications
ParameterValue
SeriesHR
Wire typeDiscrete
GenderFemale Socket
Mounting typeFree Hanging (In-Line)
Connector typeReceptacle
Fastening typeDetent Lock
Wire gauge26 AWG
Cable terminationIDC
ColorNatural
Pitch0.098\" (2.50mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions11

Product details

What This 11-Position IDC Receptacle Is

The JST 11HR-6S-P-N is an 11-circuit receptacle from the HR series, terminated via IDC to discrete 26 AWG wire. The natural-colour housing is a free-hanging (in-line) design with a closed end, meaning the wire bundle terminates at the connector face with no pass-through. This is typical for harness-to-board or harness-to-harness interconnects where the cable run ends at the receptacle.

The Obituary — and What Crosses to It

The 11HR-6S-P-N is marked Obsolete. The critical dimensions to match are the 0.098" (2.50mm) pitch, 11 positions, single row, IDC termination for 26 AWG, and the detent-lock fastening. Any replacement must also be a free-hanging, closed-end receptacle — a header won't work.

Mating Half and Wire Fit

Frequently asked questions

Is 11HR-6S-P-N obsolete?

Yes, the 11HR-6S-P-N is marked Obsolete in the lifecycle data.

What is the direct replacement for 11HR-6S-P-N?

No official direct replacement order code is listed. A form-fit-function cross must match the 0.098" (2.50mm) pitch, 11 positions, single row, IDC termination for 26 AWG, detent lock, and free-hanging closed-end housing. A current-production HR-series receptacle meeting these specs is the closest alternative.

What is the mating connector for 11HR-6S-P-N?

The mating connector is an HR-series header with male pins, matching the 0.098" (2.50mm) pitch and 11 positions. The detent lock on the receptacle engages with a corresponding ramp on the header.

What is the wire gauge range for 11HR-6S-P-N?

The 11HR-6S-P-N is terminated via IDC and accepts only 26 AWG discrete wire. The IDC slot is sized for that single gauge; other wire sizes will not terminate correctly.