Skip to main content
JST 12ZR-3H-P

JST 12ZR-3H-P ZR Series IDC Receptacle, 12 Pos, 1.50 mm

MPN 12ZR-3H-P
Active

JST ZR series IDC receptacle, 12 positions, 0.059" (1.50 mm) pitch, 1 row, tin female socket contacts, free-hanging (in-line), 30 AWG discrete wire, closed end, bulk.

$0.3984 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

12ZR-3H-P specifications
ParameterValue
SeriesZR
Wire typeDiscrete
TypeFemale Socket
MountingFree Hanging (In-Line)
Connector typeReceptacle
Wire gauge30 AWG
Cable terminationIDC
ColorNatural
Pitch0.059\" (1.50mm)
PackageBulk
FeaturesClosed End
Contact finishTin
Rows1
Positions12

Product details

IDC Receptacle for Fine-Gauge Wire Harnesses

The JST 12ZR-3H-P is a 12-position, single-row IDC receptacle from the ZR series, designed for mass-termination of 30 AWG discrete wire without stripping or crimping. The 0.059" (1.50 mm) pitch keeps the board footprint tight — each position lands on 1.50 mm centers, which is the dimension that governs the PCB layout when mating with the matching pin header. Tin-plated female socket contacts handle the signal path; the closed-end housing prevents wire from pushing through the back of the connector during assembly, a detail that saves rework time on the harness bench.

Termination and Wire Preparation

Cable termination is IDC — insulation displacement, no crimp tool for individual contacts. The wire gauge is locked to 30 AWG; the IDC slot geometry is sized for that diameter, so substituting a different gauge risks an open or intermittent connection. Free-hanging (in-line) mounting means this receptacle sits in the harness, not on the board — it mates with a through-hole or SMT pin header on the PCB. The closed-end feature acts as a wire stop, so the assembler gets positive feedback when the conductor is fully seated.

MPN
12ZR-3H-P