Skip to main content
JST 20P3.0-JMCS-G-TF(N)

JST JMC 20P3.0-JMCS-G-TF(N) Plug, 0.50mm Pitch, 20 Pos

MPN 20P3.0-JMCS-G-TF(N)
Obsolete

JST JMC series plug, outer shroud contacts, 20 positions, 2 rows, 0.50mm pitch, 3mm mated stacking height, gold contact finish, surface mount, tape and reel.

$1.0900 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Jul 2026

Specifications

20P3.0-JMCS-G-TF(N) specifications
ParameterValue
SeriesJMC
MountingSurface Mount
Connector typePlug, Outer Shroud Contacts
Mated stacking heights3mm
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR) Cut Tape (CT)
Contact finishGold
Rows2
Positions20

Product details

0.50mm Pitch FPC Plug — 20 Positions, 3mm Stack

Its 0.020" (0.50mm) pitch and 2-row layout pack 20 signal lines into a compact footprint — the kind of density you see in handheld or portable device mainboards. The outer shroud contacts give the plug a self-aligning mate with the matching receptacle, which helps avoid bent contacts during assembly on a 0.50mm pitch where misalignment tolerance is near zero. Gold contact finish is standard here, suited for the moderate mating cycles a production FPC connection sees before the assembly is locked down. Mated stacking height is 3mm — that is the full board-to-board gap once the plug is seated in its receptacle. For a 0.50mm pitch FPC interconnect, 3mm is about as low as it gets; it fits inside enclosures where the mezzanine clearance is measured in millimetres.

Obsolete — Sourcing the 20P3.0-JMCS-G-TF(N)

For a BOM line that still calls out this MPN, the supply channel is surplus and broker inventory.

At this pitch, the FPC thickness and stiffness matter: too thick a flex and the insertion force goes up; too thin and the contacts may not wipe properly. Gold plating on the contacts handles the insertion wear of assembly and rework without corrosion issues.

MPN
20P3.0-JMCS-G-TF(N)