Skip to main content
Log in
JST 30PS-JMDSS-G-1-TF(LF)(SN) — Board-to-Board Connectors

JST 30PS-JMDSS-G-1-TF(LF)(SN) JMD Series Plug, 30 Pos

MPN30PS-JMDSS-G-1-TF(LF)(SN)
Active

JST JMD series plug, outer shroud contacts, 30 positions, 2 rows, 0.020" (0.50mm) pitch, surface mount right angle, gold contact finish, solder retention, 4.80mm height above board.

$1.4200Ref. price · indicative, final on quote
JST 30PS-JMDSS-G-1-TF(LF)(SN) datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

30PS-JMDSS-G-1-TF(LF)(SN) specifications
ParameterValue
SeriesJMD
MountingSurface Mount, Right Angle
Connector typePlug, Outer Shroud Contacts
Height above board0.189\" (4.80mm)
Pitch0.020\" (0.50mm)
PackageTape & Reel (TR); Cut Tape (CT)
FeaturesSolder Retention
Contact finishGold
Rows2
Positions30

Product details

JST JMD 30-Position Plug — 0.50 mm Pitch, Right-Angle SMT

The JST 30PS-JMDSS-G-1-TF(LF)(SN) is a 30-position plug from the JMD series, using outer shroud contacts on a 0.020" (0.50mm) pitch in a dual-row layout. This is the highest-density member of the JMD family by position count — the 0.50 mm pitch keeps the board footprint compact for flex-circuit or FPC interconnects where routing space is tight.

Right-Angle SMT with Solder Retention

The 0.189" (4.80mm) height above board sets the z-axis clearance for the mating receptacle and cable bend radius. Solder retention features on the body anchor the connector during reflow and add mechanical hold against shear forces from cable strain, which is a practical concern for flex-circuit assemblies that see handling during integration.

Frequently asked questions

What is the mating connector for 30PS-JMDSS-G-1-TF(LF)(SN)?

This plug mates with the matching JMD series receptacle housing. The JMD series uses a 0.50mm pitch dual-row interface — confirm the receptacle position count matches the 30-circuit plug before specifying.

What is the pitch of JST JMD connectors?

The JMD series uses a 0.020" (0.50mm) pitch. That 0.50mm spacing is typical for fine-pitch FPC interconnects and drives the board layout trace width and spacing for the signal routing.

Where can I buy 30PS-JMDSS-G-1-TF(LF)(SN)?

This part is active and quoted to order against your BOM quantity.