2-Position Plug Housing for the JST ACH Series
The JST ACHTP-02V-S is a 2-position plug housing from the ACH series, built on a 0.047" (1.20 mm) pitch. It is a free-hanging (in-line) connector that accepts male pin crimp terminals — the contacts are not included and must be ordered separately. This is the plug half; it mates with the ACHTR-02V-S or ACHR-02V-S receptacle housing.
Mating Half and Contact Selection
The ACHTP-02V-S plugs into either the ACHTR-02V-S or ACHR-02V-S receptacle housing — both are 2-position, 1.20 mm pitch, free-hanging receptacles that accept female socket crimp terminals. Because the housing ships without contacts, you will need to source the matching male pin terminal for the plug side and the female socket for the receptacle side. The crimp termination requires a hand or pneumatic crimp tool sized for the wire gauge the terminal accepts; the wire range is not listed in this spec, so confirm the terminal datasheet for the AWG compatibility.