Rated 7 A per circuit at 300 V, this header is sized for moderate power distribution — think sensor power feeds, actuator connections, or low-current DC rails inside a sealed enclosure. The waterproof ingress protection (IP rating) is the headline differentiator here — this header is designed to mate with the matching WPJ receptacle to form a sealed interconnect suitable for outdoor, washdown, or engine-compartment harnesses. The 25.3 mm mated stack height gives a defined z-height budget for the board-to-cable assembly.
Mating and Compatibility
The 2-position, single-row layout is keyed by the housing geometry — the 4-wall shroud prevents mis-mating with non-WPJ connectors. For a complete wire-to-board interconnect, pair this header with the WPJ receptacle and the appropriate crimp terminals (typically 20-24 AWG, depending on the current draw).