Skip to main content
Log in
B06B-PNISK-1A — JST product photo
JST

B06B-PNISK-1A JST PNI Header 6 Pos 2mm Pitch Latch Lock

MPNB06B-PNISK-1A
Active

JST Sales America Inc. PNI series, Board to Cable/Wire, Header, Male Pin, 6 Positions, 2.00mm pitch, Through Hole, Press-Fit/Solder termination, Latch Lock, 3A, 100V, UL94 V-0, Natural insulation.

$0.5400Ref. price · indicative, final on quote
B06B-PNISK-1A datasheet
StockContact for availability
Lead time3-5 Days wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B06B-PNISK-1A Technical Specifications
ParameterValue
SeriesPNI
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLatch Lock
Voltage rating100V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Mated stacking heights12.25mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions6
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

Rated 3A per contact at 100V, with a mated stack height of 12.25mm.

Termination and mounting options

Termination is listed as both Press-Fit and Solder — the through-hole pins accept either a press-fit interference or a soldered joint. Tin is fine for moderate mating cycles (50-100) in a clean environment; if the application needs frequent disconnect/reconnect, gold-plated contacts would be a better choice, but this part doesn't offer that option.

Compliance and sourcing reality

Same 2.00mm pitch, same latch lock, same 3A/100V rating, same 12.25mm stack height, same RoHS non-compliance. If the BOM calls for 6 positions, the 8-position part is a drop-in replacement only if the extra two pins can be left unloaded or the board layout accommodates them.

Frequently asked questions

Is B06B-PNISK-1A RoHS compliant?

No, this part is RoHS non-compliant. Check your BOM's environmental requirements before ordering.

When sourcing B06B-PNISK-1A, what's the closest functional second-source — B08B-PNISK-1A?

Yes, B08B-PNISK-1A is the closest functional alternative. It has 8 positions instead of 6, but otherwise shares all specs: pitch, current, voltage, latch lock, stack height, and RoHS status. It can be used if the board layout allows the extra two pins to be left unloaded.

How do I get current pricing and availability for B06B-PNISK-1A?

Pricing and lead time are confirmed at quote time. Submit an RFQ with your target quantity and we'll source it against current distributor stock and manufacturer lead times.