JST HL Series Header, B08P-HL-A, Board to Cable/Wire, 8 Positions, 2 Rows, 0.156" (3.96mm) Pitch, Through Hole, Solder, Tin Contacts, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | HL |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Latch Holder |
| Voltage rating | 300V |
| Current rating | 7A |
| Operating temperature | -25°C ~ 90°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Rectangular |
| Rows | 2 |
| Pitch | 0.156\" (3.96mm) |
| Positions | 8 |
| Row spacing - mating | 0.156\" (3.96mm) |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The JST B08P-HL-A is an 8-position, dual-row header from the HL series, designed for board-to-wire power interconnects. It uses a 0.156" (3.96mm) mating pitch with the same row spacing, giving a compact but serviceable footprint for routing 20-22 AWG wire.
This header mates with the JST HL series receptacle housing using crimp terminals. The through-hole solder termination requires a 0.156" pitch footprint on the PCB.
The B08P-HL-A is rated 7A per circuit at 300V, with tin-plated contacts on both mating and post surfaces.
The B08P-HL-A mates with the JST HL series receptacle housing HLP-08V using crimp terminals SHL-xxT. The latch holder on the header engages with the receptacle's locking ramp.