Skip to main content
Log in
B09B-PASK-1 — JST product photo
JST

B09B-PASK-1 JST PA Series 9-Pin Header, 2.00mm Pitch

MPNB09B-PASK-1
Active

JST PA series, B09B-PASK-1, 9-position single-row shrouded header, 2.00mm pitch, through-hole, locking ramp, tin-plated contacts, rated 3A at 250V.

$0.6000Ref. price · indicative, final on quote
B09B-PASK-1 datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B09B-PASK-1 Technical Specifications
ParameterValue
SeriesPA
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.303\" (7.70mm)
Insulation materialPolybutylene Terephthalate (PBT), Glass Filled
Mated stacking heights9.9mm, 14.7mm, 14.9mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationKinked Pin, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions9
Contact finish - postTin
Contact length - post0.118\" (3.00mm)
Overall contact length0.319\" (8.10mm)
Contact finish - matingTin
Contact length - mating0.126\" (3.20mm)

Product details

9-Position, 2.00mm Pitch, Locking Ramp Header

The B09B-PASK-1 is a 9-position, single-row, shrouded header from JST's PA series, on a 2.00mm pitch. It's a board-to-cable/wire connector with a locking ramp for secure mating — the ramp clicks when fully seated and holds against vibration, which matters when the cable gets tugged in a cabinet. The tin finish suits moderate mating cycles in indoor equipment.

Mates with JST PA series crimp housings using the appropriate crimp terminals. The post length is 0.118" (3.00mm), suitable for standard 1.6mm PCBs. Mated stacking heights available: 9.9mm, 14.7mm, or 14.9mm depending on the mating housing and cable assembly used.

Frequently asked questions

What is the closest functional equivalent to B09B-PASK-1?

The B09B-PASK (without the -1 suffix) is mechanically identical — same 9 positions, 2.00mm pitch, locking ramp, and tin plating. The -1 variant may indicate a specific packaging or color option; confirm with the datasheet if your application requires the exact -1 marking.