JST XH series, 10-position, single-row shrouded header, 2.50 mm pitch, tin-plated male pins, detent lock, through-hole press-fit/solder termination, UL94 V-0 natural nylon housing, rated 3 A at 250 V.
| Parameter | Value |
|---|---|
| Series | XH |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 250V |
| Current rating | 3A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.276\" (7.00mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Mated stacking heights | 9.8mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Features | Board Guide |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.098\" (2.50mm) |
| Positions | 10 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Contact finish - mating | Tin |
Mated stack height is 9.8 mm — this sets the z-height clearance between the board and the wire assembly, so check your enclosure gap before committing the BOM.
That audible/tactile feedback is the primary retention against vibration loosening in a wire-to-board joint.
Termination is press-fit, solder — the square pins are inserted into plated through-holes and soldered on the opposite side.
Yes. This is a shrouded header from the JST XH series, designed to mate with XH series crimp housings (e.g., XHP-10, B10B-XH-A). The 2.50 mm pitch, single-row layout, and detent lock are standard for the XH wire-to-board system.