Pitch, Positions, and Current Capacity
At 0.098" (2.50mm) pitch, the 11 positions fit into a compact board footprint — each contact carries 3 A at up to 250 V. The tin-on-tin contact interface (mating and post finish both tin) is rated for the full 3 A at 25°C ambient; above that, derate per the housing material limit of the nylon 6/6 body. The 85°C operating ceiling is typical for a PA66 header in a low-power signal or sensor interconnect.
Through-hole termination with press-fit solder tails — the 0.126" (3.20mm) post length suits single-sided boards or standard plated-through holes. The header mounts vertically (straight), so plan for the 0.236" (6.00mm) insulation height above the board surface.