JST PH series, 12-position, 2.00mm pitch, shrouded 4-wall vertical header, male pin, tin-plated contacts, detent lock, press-fit/solder termination, UL94 V-0, rated 2A, 100V.
| Parameter | Value |
|---|---|
| Series | PH |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 100V |
| Current rating | 2A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.236\" (6.00mm) |
| Insulation material | Polyamide (PA66), Nylon 6/6 |
| Parameter | Value |
|---|---|
| Mated stacking heights | 8mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 4 Wall |
| Termination | Press-Fit, Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.079\" (2.00mm) |
| Positions | 12 |
| Contact finish - post | Tin |
| Contact length - post | 0.134\" (3.40mm) |
| Overall contact length | 0.333\" (8.45mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.130\" (3.30mm) |
Overall contact length is 8.45 mm, with a mating pin length of 3.30 mm and a post length of 3.40 mm — the through-hole tail is short enough for single-sided boards but check your board thickness against the post length.
Brokers and maintenance techs need to know if part can still be sourced or needs replacement.
Engineers need to validate electrical specs and mechanical dimensions for design-in.
Sourcing buyers need to find distributors with immediate availability to avoid lead time issues.
Design engineers and techs need the corresponding female housing or connector for wire harnessing.
Pricing impacts BOM cost and sourcing quantity decisions.
Alternatives needed if part is out of stock or obsolete.