The B13B-EH-A(LF)(SN): This 13-position single-row header uses a 2.50 mm pitch, which sets the board footprint for routing traces between the pins. The 0.098" spacing is standard for signal-level wire-to-board interconnects and matches the JST EH series receptacle housing. The through-hole termination with a 3.20 mm post length gives a solid solder joint on the PCB, and the 6.00 mm insulation height leaves clearance for mating the receptacle without interference from nearby components.
Current and Voltage Ceiling for Signal Duty
The 3 A rating keeps the temperature rise within the nylon 6/6 housing limits at 85°C ambient.
Mates with JST EH series crimp receptacle housings (e.g., EHR-13) using the matching crimp terminal (SEH-001T-P0.6 or equivalent).