Skip to main content
Log in
B14B-PADSS-1F — JST product photo
JST

B14B-PADSS-1F JST Header 14 Pos 2mm Locking Ramp

MPNB14B-PADSS-1F
Active

JST Sales America Inc., PAD series, Board to Cable/Wire Header, 14 positions, 2.00mm pitch, shrouded - 4 wall, locking ramp, through hole solder, 3 A, 250 V, UL94 V-0, natural insulation, tin contacts.

$0.8000Ref. price · indicative, final on quote
B14B-PADSS-1F datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B14B-PADSS-1F Technical Specifications
ParameterValue
SeriesPAD
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating3A
Operating temperature-25°C ~ 85°C
Contact materialCopper Alloy
Insulation colorNatural
Insulation height0.402\" (10.20mm)
Insulation materialPolyamide (PA66), Nylon 6/6, Glass Filled
Mated stacking heights12.4mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
FeaturesBoard Guide
ShroudingShrouded - 4 Wall
TerminationSolder
Contact shapeSquare
Rows2
Pitch0.079\" (2.00mm)
Positions14
Row spacing - mating0.079\" (2.00mm)
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Contact finish - matingTin

Product details

The four-wall shroud and locking ramp give it a positive mechanical latch that holds against vibration — a step up from a plain friction-lock header.

The 2.00mm pitch and dual-row layout with 14 positions loaded all give a 14.00mm overall pin span across the rows. The through-hole posts are 3.40mm long — standard for a 1.6mm board with a solder fillet.

Locking ramp and mating half

The locking ramp on the shroud mates with the corresponding latch on the PAD series receptacle housing. The board guide feature helps align the connector pair during blind mating.

Frequently asked questions

What is the mating connector for B14B-PADSS-1F?

The mating half is a PAD series female receptacle housing (crimp type) that accepts the locking ramp on this header. The specific order code depends on circuit count and wire exit orientation; the PAD series receptacle with the matching 14-position layout and locking ramp interface mates directly.

Is B14B-PADSS-1F RoHS compliant?

No. The lifecycle record lists this part as RoHS non-compliant. If your application requires RoHS, the variant B14B-PADSS(LF)(SN) is listed in tray packaging — verify its compliance status against your BOM before ordering.

What is the current rating and voltage rating of B14B-PADSS-1F?

Rated 3 A per contact at 250 V. The 2.00mm pitch and tin-plated contacts set the current ceiling; derate above 85°C ambient per the series derating curve.