JST ZH series, 3-position, 1-row, shrouded header, surface-mount, 1.50 mm pitch, 1 A, 50 V, tin-plated contacts, natural PA6T housing, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | ZH |
| Type | Male Pin |
| Mounting | Surface Mount |
| Connector type | Header |
| Fastening type | Detent Lock |
| Voltage rating | 50V |
| Current rating | 1A |
| Operating temperature | -25°C~85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.197\" (5.00mm) |
| Insulation material | Polyamide (PA6T), Nylon 6T, Glass Filled |
| Parameter | Value |
|---|---|
| Mated stacking heights | 6.4mm |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Tape & Reel (TR); Cut Tape (CT) |
| Features | Solder Retention |
| Shrouding | Shrouded - 4 Wall |
| Termination | Solder |
| Contact shape | Circular |
| Rows | 1 |
| Pitch | 0.059\" (1.50mm) |
| Positions | 3 |
| Contact finish - post | Tin |
| Contact finish - mating | Tin |
The B3B-ZR-SM4-TF(LF)(SN): This is a 3-position, single-row, shrouded header from JST's ZH series.
Tin is adequate for low-cycle applications (under 50 mating cycles) in clean, indoor environments. For higher cycle counts or corrosive atmospheres, the gold-plated variant in the ZH series would be a better fit.
It is a 3-position, single-row header with all positions loaded. The pinout is 1-2-3 in a straight line on 1.50 mm pitch. Mates with JST ZH series crimp receptacle housings.
This is a signal-level rating — not suitable for power distribution above that ceiling.