Skip to main content
Log in
B5B-PH-K-S — JST product photo
JST

B5B-PH-K-S JST PH Series 5-Pin Header, 2.00mm Pitch

MPNB5B-PH-K-S
Active

JST PH series header, order code B5B-PH-K-S, 5 positions, single row, 2.00 mm pitch, 2 A, 100 V, through-hole vertical, tin-plated mating contacts, press-fit solder termination.

$0.3100Ref. price · indicative, final on quote
B5B-PH-K-S datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B5B-PH-K-S Technical Specifications
ParameterValue
SeriesPH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeDetent Lock
Voltage rating100V
Current rating2A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.236\" (6.00mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights8mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 4 Wall
TerminationPress-Fit, Solder
Contact shapeSquare
Rows1
Pitch0.079\" (2.00mm)
Positions5
Contact finish - postTin
Contact length - post0.134\" (3.40mm)
Overall contact length0.333\" (8.45mm)
Contact finish - matingTin
Contact length - mating0.130\" (3.30mm)

Product details

A detent lock on the housing side gives a tactile click when fully mated, reducing the chance of partial engagement.

Mating half and termination details

The B5B-PH-K-S mates with JST PH series crimp housings (e.g., PHR-5) loaded with the matching SPH-002T-P0.5S or SPH-004T-P0.5S crimp terminals. The detent lock on the header engages the latch on the housing for a positive hold. Termination is press-fit solder — the through-hole posts are designed for wave or hand soldering. The contact length on the post side is 0.134" (3.40 mm), which fits standard 1.6 mm PCBs with enough tail protrusion for a reliable solder fillet.

Frequently asked questions

What is the mating connector for B5B-PH-K-S?

The B5B-PH-K-S mates with JST PH series crimp housings such as PHR-5, loaded with SPH-002T-P0.5S or SPH-004T-P0.5S crimp terminals. The detent lock on the header engages the housing latch for a secure connection.