1.50 mm Pitch, 5-Position SMD Header – ZH Series Fit
The B5B-ZR-SM4-TF(LF)(SN): With a mated stack height of 6.4 mm, this header suits low-profile enclosures where the board-to-board or wire-to-board interface must fit within a tight z-height budget.
Mating and Termination Compatibility
This header mates with ZH series crimp receptacles (e.g., ZR-xxP or similar) that accept 28–32 AWG wire with the appropriate crimp terminal. The detent lock engages with the corresponding latch on the receptacle housing, providing vibration-resistant retention in portable or mobile equipment. Termination is solder-only — the SMD pads are designed for reflow soldering; the tape-and-reel packaging supports automated pick-and-place assembly.
Peer Comparison: Position Count Variants
Within the ZH series, the B5B-ZR-SM4-TF(LF)(SN) (5 positions) is the next step up from the B4B-ZR-SM4-TF(LF)(SN) (4 positions). For a BOM requiring 5 signal lines, the 5-position variant avoids leaving an unused position that would need to be left open or terminated with a dummy pin.