Skip to main content
Log in
B6PS-VH — JST product photo
JST

Molex VH B6PS-VH Header, 6 Pos, 3.96mm, R/A, 10A

MPNB6PS-VH
Active

Molex VH series shrouded header, B6PS-VH, 6 positions, 3.96 mm pitch, single row, right-angle through-hole, locking ramp, tin-plated brass contacts, 10 A, 250 V, UL94 V-0.

$0.4900Ref. price · indicative, final on quote
B6PS-VH datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B6PS-VH Technical Specifications
ParameterValue
SeriesVH
GenderMale Pin
Mounting typeThrough Hole, Right Angle
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating10A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.335\" (8.51mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 1 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.156\" (3.96mm)
Positions6
Contact finish - postTin
Contact length - post0.142\" (3.60mm)
Contact finish - matingTin
Contact length - mating0.303\" (7.70mm)

Product details

VH Series Power Header — 6 Positions, 3.96 mm Pitch

The Molex VH series B6PS-VH is a 6-position, single-row shrouded header on 3.96 mm pitch. It's a board-to-cable/wire interconnect — the right-angle through-hole orientation routes the wire parallel to the PCB, which matters when you're tight on z-height above the board. Rated 10 A per circuit at 250 V, this is a power header, not a signal-density part.

Rated 10 A per contact. The PA66 insulator is UL94 V-0. Solder posts are 0.142" long. Pitch is 0.156" (3.96 mm).

Frequently asked questions

What's the difference between B6PS-VH and B6PS-VH(LF)(SN)?

The B6PS-VH(LF)(SN) carries a lead-free finish on the solder tails and tin plating, making it RoHS-compliant. The standard B6PS-VH is listed as RoHS non-compliant. Dimensions, ratings, and footprint are identical.

Where can I buy B6PS-VH and how is it quoted?

The B6PS-VH is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock-holding claim is made here.