Skip to main content
Log in
B7P-VH — JST product photo
JST

Molex VH B7P-VH Header, 7 Pos, 3.96mm, 10A

MPNB7P-VH
Active

Molex VH series B7P-VH, 7-position 0.156" (3.96mm) pitch shrouded header, board-to-wire, through-hole solder, male pin, locking ramp, 10A, 250V, tin-plated brass contacts, UL94 V-0.

$0.4500Ref. price · indicative, final on quote
B7P-VH datasheet
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

B7P-VH Technical Specifications
ParameterValue
SeriesVH
GenderMale Pin
Mounting typeThrough Hole
Connector typeHeader
Fastening typeLocking Ramp
Voltage rating250V
Current rating10A
Operating temperature-25°C ~ 85°C
Contact materialBrass
Insulation colorNatural
Insulation height0.370\" (9.40mm)
Insulation materialPolyamide (PA66), Nylon 6/6
Mated stacking heights16.5mm
Material flammability ratingUL94 V-0
StyleBoard to Cable/Wire
PackageBulk
ShroudingShrouded - 1 Wall
TerminationSolder
Contact shapeSquare
Rows1
Pitch0.156\" (3.96mm)
Positions7
Contact finish - postTin
Contact length - post0.146\" (3.70mm)
Overall contact length0.575\" (14.60mm)
Contact finish - matingTin
Contact length - mating0.303\" (7.70mm)

Product details

The B7P-VH: 10 A per circuit at 250 V. The 3.96 mm pitch provides clearance for 250 VAC/DC circuits. Tin plating is standard for moderate mating-cycle duty in clean indoor environments. The locking ramp fastening type holds the mated pair under vibration — the ramp clicks over the receptacle latch and won't back out from machine shake or cable tug.

Comparison with the 8-Position Sibling

The B8P-VH(LF)(SN) is the 8-position version at the same 3.96 mm pitch, same 10 A and 250 V ratings, same locking ramp and shrouding. No other spec changes between them.

Frequently asked questions

Where can I buy B7P-VH and get a price?

The B7P-VH is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for your BOM quantity.

Will B7P-VH drop into a panel specified around B7P-VH(LF)(SN) without rewiring?

Yes — the B7P-VH and B7P-VH(LF)(SN) share the same 7-position layout, 3.96 mm pitch, locking ramp, and shrouding. The only difference is the plating finish (the (LF)(SN) variant uses lead-free tin). It mates with the same receptacle housing and fits the same board footprint.