JST VH series Board to Cable/Wire Header, B7P-VH-B, 7 positions single row, 0.156" (3.96mm) pitch, tin-plated brass contacts rated 10A at 250V, through-hole solder termination, shrouded with locking ramp, PBT UL94 V-0 insulator, -25°C to 85°C, Bulk.
| Parameter | Value |
|---|---|
| Series | VH |
| Gender | Male Pin |
| Mounting type | Through Hole |
| Connector type | Header |
| Fastening type | Locking Ramp |
| Voltage rating | 250V |
| Current rating | 10A |
| Operating temperature | -25°C ~ 85°C |
| Contact material | Brass |
| Insulation color | Natural |
| Insulation height | 0.370\" (9.40mm) |
| Insulation material | Polybutylene Terephthalate (PBT), Glass Filled |
| Material flammability rating | UL94 V-0 |
| Style | Board to Cable/Wire |
| Package | Bulk |
| Shrouding | Shrouded - 1 Wall |
| Termination | Solder |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.156\" (3.96mm) |
| Positions | 7 |
| Contact finish - post | Tin |
| Contact length - post | 0.146\" (3.70mm) |
| Overall contact length | 0.575\" (14.60mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.303\" (7.70mm) |
The 3.96 mm pitch gives enough room for the 10 A per circuit rating without forcing a wide board footprint — each contact carries bus-level current for a power distribution or harness application, not a signal line.
The B7P-VH-B and B7P-VH share the same 7-position, 3.96 mm pitch, 10 A rating, and tin-plated contacts. The B7P-VH-B is the standard ordering code; the B7P-VH (without suffix) is functionally identical. Both are active and interchangeable on the same footprint.
The B7P-VH-B is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock-holding claim or price figure is published here.
The B7P-VH-B is ROHS3 compliant and carries a UL94 V-0 flammability rating on the PBT insulator. Standard JST documentation (datasheet, RoHS declaration) is available through the manufacturer or distributor channels.