Keystone Electronics PC Pin, order code 11152, double end, 0.040" (1.02mm) diameter, tin-plated brass, PTFE-insulated, press-fit through-hole termination, 0.515" (13.08mm) overall length.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Terminal type | PC Pin |
| Mounting hole diameter | 0.086\" (2.18mm) |
| Terminal style | Double End |
| Contact material | Brass |
| Insulation color | White |
| Material - insulation | Polytetrafluoroethylene (PTFE) |
| Package | Bulk |
| Insulation | Insulated |
| Termination | Press-Fit |
| Contact finish | Tin |
| Board thickness | 0.062\" (1.57mm) |
| Flange diameter | 0.125\" (3.18mm) |
| Length - overall | 0.515\" (13.08mm) |
| Length - above flange | 0.210\" (5.33mm) |
| Length - below flange | 0.265\" (6.73mm) |
| Pin size - above flange | 0.040\" (1.02mm) Dia |
| Pin size - below flange | 0.040\" (1.02mm) Dia |
The 11152 is a double-end PC pin from Keystone Electronics, insulated with a white PTFE sleeve that leaves 0.210" (5.33mm) exposed above the flange and 0.265" (6.73mm) below for through-hole board mounting. The 0.040" (1.02mm) diameter brass pin carries a tin finish and terminates via press-fit into a 0.086" (2.18mm) mounting hole on boards up to 0.062" (1.57mm) thick.
The 11152 requires a 0.086" (2.18mm) diameter mounting hole for press-fit installation into boards up to 0.062" (1.57mm) thick.
The insulation is white polytetrafluoroethylene (PTFE), leaving the double-end pin exposed above and below the flange.