Keystone Electronics PCB Single-Post Pin, order code 1364-2, 0.080" (2.03mm) diameter above flange, gold-plated brass, non-insulated, through hole, swage termination, bulk package.
| Parameter | Value |
|---|---|
| Mounting | Through Hole |
| Terminal type | PC Pin |
| Mounting hole diameter | 0.094\" (2.39mm) |
| Terminal style | Single End |
| Contact material | Brass |
| Package | Bulk |
| Insulation | Non-Insulated |
| Termination | Swage |
| Contact finish | Gold |
| Board thickness | 0.062\" (1.57mm) |
| Flange diameter | 0.156\" (3.96mm) |
| Length - overall | 0.612\" (15.54mm) |
| Length - above flange | 0.500\" (12.70mm) |
| Length - below flange | 0.082\" (2.08mm) |
| Pin size - above flange | 0.080\" (2.03mm) Dia |
| Contact finish thickness | 10.0µin (0.25µm) |
The 1364-2 is a single-end PC pin from Keystone Electronics, designed for through-hole mounting with a swage termination that secures into a 0.094" (2.39mm) diameter hole on boards up to 0.062" (1.57mm) thick. The brass pin carries gold plating (10.0µin / 0.25µm) on the contact surface, with a 0.080" (2.03mm) diameter above the flange and an overall length of 0.612" (15.54mm).
The flange diameter is 0.156" (3.96mm). The length below the flange is 0.082" (2.08mm), which sets the swage engagement depth into the board.
No, the 1364-2 is non-insulated.