Würth Elektronik Series 6791 board-in IDC coaxial connector, 006791001003005, 50 Ohm impedance, 6 GHz max frequency, single port, surface-mount right-angle, solder shield termination, -40°C to 105°C.
| Parameter | Value |
|---|---|
| Series | 6791 |
| Mounting | Surface Mount, Right Angle |
| Connector type | Direct to Cable, IDC |
| Voltage rating | 125 V |
| Frequency - max | 6 GHz |
| Cable group | 2.70mm-3.10mm Coaxial Cable |
| Operating temperature | -40°C ~ 105°C |
| Housing color | Black |
| Dielectric material | Polyamide (PA46), Nylon 4/6, Glass Filled |
| Center contact material | Copper Alloy |
| Package | Tape & Reel (TR) Cut Tape (CT) |
| Impedance | 50 Ohms |
| Number of ports | 1 |
| Shield termination | Solder |
| Contact termination | Solder |
| Center contact plating | Tin |
The Würth Elektronik 006791001003005 is a Series 6791 board-in IDC coaxial connector that terminates a coaxial cable directly onto the PCB edge — no separate receptacle housing needed.
This connector accepts coaxial cable with an outer diameter between 2.70 mm and 3.10 mm. The IDC termination pierces the jacket and contacts the centre conductor and shield in one operation; no stripping or soldering of the shield braid is required.
It accepts coaxial cable with an outer diameter between 2.70 mm and 3.10 mm — typical for RG-178, RG-174, or similar thin coax.