Contact system and plating
The 0600-0-05-21-00-00-01-0 is a double-end PC pin from the Mill-Max 0600 series, designed for through-hole solder termination. The brass alloy contact carries 20.0µin (0.51µm) gold plating over the entire pin — the gold layer supports repeated soldering and field rework without oxidation at the joint.
Dimensions and board fit
Overall length is 0.440" (11.18mm). The 0.048" (1.22mm) diameter above the 0.070" (1.77mm) flange passes through a 0.052" (1.32mm) mounting hole; below the flange a 0.047" (1.19mm) square tail provides the solder anchor. Length above flange is 0.150" (3.81mm); below flange is 0.250" (6.35mm).