Swage-mount PC pin, 0.094" diameter
The 2362-2-01-44-00-00-07-0 is a single-end slotted PC pin from Mill-Max's 2362 series, designed for through-hole swage mounting into a 0.067" (1.70 mm) diameter hole. The brass-alloy pin carries a 300.0 µin (7.62 µm) silver contact finish and measures 0.240" (6.10 mm) overall length, with 0.156" (3.96 mm) above the flange and 0.084" (2.13 mm) below.
Board fit and swage retention
The 0.094" (2.39 mm) flange diameter and 0.067" (1.70 mm) mounting hole dimension set the board-fit parameters — the pin is intended for a 0.062" (1.57 mm) thick PCB, where the below-flange length provides the swage interference that locks the pin in place after insertion.