Mill-Max 2530 series PC pin, order code 2530-4-00-80-00-00-07-0, double-end terminal style, tin-plated brass alloy, 0.484" overall length, 0.040" pin diameter above flange, swage termination, through-hole mount, bulk package.
| Parameter | Value |
|---|---|
| Series | 2530 |
| Mounting | Through Hole |
| Terminal type | PC Pin |
| Mounting hole diameter | 0.094\" (2.39mm) |
| Terminal style | Double End |
| Contact material | Brass Alloy |
| Package | Bulk |
| Insulation | Non-Insulated |
| Termination | Swage |
| Contact finish | Tin |
| Board thickness | 0.125\" (3.18mm) |
| Flange diameter | 0.125\" (3.18mm) |
| Length - overall | 0.484\" (12.29mm) |
| Length - above flange | 0.151\" (3.84mm) |
| Length - below flange | 0.312\" (7.92mm) |
| Pin size - above flange | 0.040\" (1.02mm) Dia |
| Contact finish thickness | 200.0µin (5.08µm) |
The 2530-4-00-80-00-00-07-0 is a double-end PC pin from Mill-Max's 2530 series, terminated by swage into a 0.094" mounting hole on boards 0.125" thick. The brass alloy body carries a 200.0µin tin contact finish over the full 0.484" length; the above-flange pin diameter is 0.040".