The Molex 0009501071 is a 7-circuit receptacle housing from the SPOX 5195 series, built for wire-to-board interconnect in harness assemblies. It carries a 0.156" (3.96mm) pitch in a single row, with a natural PA66 body and a locking ramp that gives positive retention against vibration — a common requirement in automotive and industrial cabinet wiring. The housing is free-hanging (in-line), meaning it terminates a cable bundle and mates with a board-mounted header.
This housing ships empty — the spec note is explicit: Contacts Not Included. The SPOX 5195 series uses a standard crimp terminal that accepts the wire gauge range specified in the terminal datasheet. The locking ramp holds the terminal in place once inserted; the natural body provides the insulation and strain relief.
Mating Half and Board Footprint
The 0009501071 mates with a Molex SPOX 5195 series header at the same 0.156" pitch. The 7-position count matches a 7-circuit board header — typically a vertical or right-angle pin header with the same locking ramp feature. The 3.96mm pitch gives enough room for 18 AWG to 22 AWG power wiring without crowding the board layout.
ROHS3 compliant. No official successor or cross-reference has been published, so this remains the direct BOM line for SPOX 5195 7-circuit receptacle applications.