Free-Hanging Receptacle for the KK508 System
It accepts non-gendered crimp terminals — the actual contacts are ordered separately, as noted on the product listing. The natural nylon (polyamide) housing provides the insulation and mechanical retention for the crimped terminals. With a 0.200" pitch, this connector family is suited for moderate-density power and signal distribution in appliances, industrial controls, and consumer electronics where the board-side header is on a standard 5.08 mm grid.
Critical Sourcing Note: Contacts Are Separate
The 0010011034 is a housing only — it does not include crimp terminals. The listing explicitly states 'Contacts Not Included'. To populate this housing, you must order the matching KK508 crimp terminals separately. This is the most common procurement miss on this part: the BOM line for the housing alone will not yield a functional connector.
Pitch and Mating Half
This receptacle mates with any KK508-series pin header on the same pitch — typically a breakaway or fixed pin header with 0.045" square pins. The 3-position count matches a 3-circuit header; verify the header's pin count and orientation (vertical or right-angle) against your board layout.
There is no end-of-life notice or last-time-buy pressure on this part.