The 0010112083: It is the housing only — contacts are ordered separately and crimped onto the wire before insertion. The locking ramp on the top surface mates with the matching header latch for a positive hold that resists vibration loosening, a common failure point on unlatched connectors in moving assemblies.
Mating and Termination
This receptacle mates with the matching KK254 0.100" pitch header — the locking ramp engages the header latch for a vibration-resistant connection. Termination is crimp-style: the installer selects the appropriate KK254 crimp terminal (sold separately), crimps it to the wire, and pushes it into the housing cavity until the terminal tang locks. The white nylon insulation material (polyamide) provides the typical mechanical and thermal performance for internal harness applications.
What You Need to Know Before Ordering
The single most important fact on this listing: contacts are not included. A buyer who orders only the housing will have an empty shell — the crimp terminals must be sourced separately under a different order code. The free-hanging (in-line) mounting means this is a cable-side connector, not a board-mounted one.