The Molex 0014600032 is a 3-position IDC receptacle from the SL 70400 series. It terminates 24 AWG discrete wire or ribbon cable directly through the insulation displacement slot — no crimp tool needed, just a simple press.
Termination and Cable Prep — What You Need On Site
It works with 24 AWG discrete wire or ribbon cable — the slot geometry is sized for that gauge. If you're re-pinning a field harness and the original connector has cracked latches or corroded contacts, this drops into the same SL 70400 housing family.
Mating Half and Harness Compatibility
This receptacle mates with any SL series 0.100" pitch pin header — the male pins are 0.025" square. For a 3-position connection, the mating header would be a Molex 70543 or equivalent SL pin header with the same circuit count.