Molex KK254 series, 42375, unshrouded breakaway header, 5 positions, 2.54 mm pitch, through-hole, tin-plated male pins, black nylon housing, UL94 V-0.
| Parameter | Value |
|---|---|
| Series | KK254, 42375 |
| Type | Male Pin |
| Mounting | Through Hole |
| Connector type | Header, Breakaway |
| Fastening type | Push-Pull |
| Insulation color | Black |
| Insulation height | 0.090\" (2.29mm) |
| Insulation material | Polyamide (PA), Nylon, Glass Filled |
| Material flammability rating | UL94 V-0 |
| Style | Board to Board or Cable |
| Package | Bulk |
| Shrouding | Unshrouded |
| Parameter | Value |
|---|---|
| Termination | Solder |
| Applications | Automotive, General Purpose, Medical, Telecommunications |
| Contact shape | Square |
| Rows | 1 |
| Pitch | 0.100\" (2.54mm) |
| Positions | 5 |
| Contact finish - post | Tin |
| Contact length - post | 0.125\" (3.18mm) |
| Overall contact length | 0.455\" (11.56mm) |
| Contact finish - mating | Tin |
| Contact length - mating | 0.240\" (6.10mm) |
| Contact finish thickness - post | 100.0µin (2.54µm) |
| Contact finish thickness - mating | 100.0µin (2.54µm) |
The 0022284050: The 2.54 mm pitch matches the legacy 0.100-inch grid, so it drops into existing PCB layouts without a footprint change.
Tin is cost-effective and works well for low-cycle-count applications — think one-time assembly or occasional field service. If the connector will see repeated connect-disconnect cycles, the tin surface will fret and oxidise faster than gold. For a harness that stays mated for the life of the product, tin is fine.
It mates with a KK254 series crimp receptacle housing (e.g., Molex 002201 series) using the matching crimp terminals. The 2.54 mm pitch and unshrouded pin layout are standard for the KK254 wire-to-board system.