Termination is solder only — no press-fit option; the through-hole post is tin-plated (100.0 µinch) for good solder wetting and a reliable joint.
Board Layout Dimensions
The header stands 0.090" (2.29 mm) above the board surface after soldering, with the mating pin extending 0.320" (8.13 mm) above the insulator — this sets the z-height clearance for the mating receptacle and any components behind it. Single-row 10-position layout at 2.54 mm pitch means the board footprint spans 0.900" (22.86 mm) from centre of pin 1 to centre of pin 10, plus the post length of 0.120" (3.05 mm) below the board.