2.54 mm Pitch, 5-Position Breakaway Header — Board-Edge Fit
The 0022288051: The breakaway style means the header is a fixed 5-position part, not a snap-to-length strip — order the exact circuit count your BOM calls for.
Tin Plating — Moderate-Duty Contact Surface
Both the mating pin and solder tail carry 100 µ" (2.54 µm) tin plating — thick enough for 10–25 mating cycles in a typical wire-to-board harness without fretting corrosion.
ROHS3 compliant.
Mates with KK254 series crimp receptacle housings (e.g., 002201 series) using standard 0.100" pitch female terminals. The unshrouded design means no polarization key — verify the mating housing orientation during assembly. Through-hole solder termination, right-angle.