Board Fit and Pin Spacing
The 0026481085: Single-row layout means the connector occupies a narrow band on the PCB edge, leaving room for adjacent components or wire exits.
Contact and Plating Grade
Tin finish on both the mating pin and the solder post, 60.0µin thick — this is a cost-optimized contact for moderate mating cycles (typically 25–50 cycles) in dry indoor environments. Not for high-vibration or corrosive atmospheres where gold would be specified. The square brass pin, 0.450" mating length, provides a reliable gas-tight connection with the matching KK396 crimp receptacle.
Locking and Vibration Resistance
Friction lock on the shroud keeps the mating housing engaged under moderate vibration — the ramp on the header catches the latch on the receptacle, preventing accidental disconnect in automotive or industrial equipment. The single-wall shroud guides the plug during mating but does not fully enclose the pins; the mating housing must be aligned before seating.
ROHS3 compliant per the current lifecycle status; no restricted substances above threshold limits.
Supplied in bulk packaging — not available in tape and reel for this order code.
Position Count Alternatives
The same KK396 header family offers 6-position (0026481065), 7-position (0026481075), and 9-position (0026481095) variants — all share the 0.156" pitch, tin plating, and friction lock. Choose the circuit count that matches your harness.