Housing for a 9-Circuit Power or Signal Harness
The Molex 1625 series 0050361871 is a 9-position receptacle housing designed for wire-to-wire or wire-to-panel interconnects where a reliable, vibration-resistant mate is needed. It uses a 0.145" (3.68mm) pitch and 0.145" (3.68mm) row spacing across three rows, giving it a compact footprint for a 9-circuit bundle. Panel mount is snap-in style, so it presses into a cutout without screws or clips.
The contact type is listed as "Male or Female," meaning the housing accepts either pin or socket terminals depending on the mating half you are building. The termination is crimp, so you will also need the correct applicator tool or hand crimper for the wire gauge you are using. Stock both halves or neither: pair this receptacle with the corresponding 1625 series plug housing and terminals to avoid an orphan shell on the shelf.
Panel Mount and Locking Ramp — Fit for Field Service
The snap-in panel mount means this housing locks into a chassis cutout without extra hardware — a time-saver on the assembly line and in field replacement. For a technician swapping a harness in the field, the audible click of the ramp tells you the pair is fully mated without needing a torque spec or visual check.