Panel-Mount Barrier Block for 6-Circuit Power Distribution
The Molex 0387006106 is a 6-circuit barrier terminal block from the Beau 38700 series, designed for through-hole or chassis/panel mounting with integral flanges. It accepts 14-22 AWG wire and terminates via screws on top with PC pin solder tails on the bottom. The dual-wall barrier construction provides physical isolation between adjacent terminals, reducing the risk of accidental shorting during wiring or service.
Pitch, Wire Range, and Termination Details
The 0.325" (8.26 mm) pitch gives enough spacing for the 15 A rating without crowding adjacent wires — a practical fit for 14 AWG power runs at the panel edge. The screw terminals use a steel screw with zinc clear chromate finish, which resists corrosion in humid cabinet environments. Each of the 6 wire entries accepts one conductor; the bottom PC pins solder into the PCB for a permanent connection. The flanges accept a #6 mounting screw for panel attachment — the block does not rely solely on the solder joints for mechanical retention.