The Molex Eurostyle 39100 0391002310 is a 10-circuit enclosed terminal strip designed for panel or chassis-mounted power distribution. It uses screw-clamp termination on the top side — each of the 20 wire entries accepts 8-20 AWG conductors — with a closed bottom, so the screw heads and wire clamps are the only live parts exposed above the insulating polyamide housing. The 0.472" (12.00mm) pitch gives enough terminal-to-terminal creepage to support the 300V rating while keeping the strip compact for a 10-position power block.
The 8-20 AWG wire range covers heavy power conductors (8 AWG for the feed) down to control wiring (20 AWG for the load side) in the same block.
The white PA66 housing is a visual identifier in dense panel wiring — when multiple terminal strips share a DIN rail or backplane, the color helps a technician pick the right block without reading every label. The zinc-plated steel screws close down on the conductor through the enclosed barrier, which prevents stray strands from bridging adjacent terminals. Two rows of 10 wire entries each (20 total) allow daisy-chaining or dual-feed configurations per circuit.