The Molex Eurostyle 39100 0391002502 is a 2-circuit enclosed barrier terminal strip on a 0.591" (15.00 mm) pitch, rated 63 A at 600 V. The housing is white polyamide (PA66/Nylon 6/6) rated UL94 V-0, with a closed bottom and zinc-plated steel terminal screws. Two rows of wire entries — four total — allow dual-feed or daisy-chain wiring in a single strip.
The 63 A rating is the headline spec here — it tells you this strip carries main-power current, not branch-circuit signal. The limiting factor is the temperature rise in the PA66 housing at full load; the 105°C ceiling gives headroom for a 30°C rise at 63 A in a 40°C cabinet. The 600 V rating matches the standard industrial panel voltage class (UL 508 / CSA C22.2 No. 158). The 6-14 AWG wire range is the practical fit check: 6 AWG is heavy cable for a 60 A feed, 14 AWG is typical for a control-circuit tap. The closed bottom means the strip is intended for chassis or panel mounting with the screw terminals on top — no through-hole PCB footprint, no DIN rail adapter. The enclosed barrier prevents accidental shorting between adjacent circuits at 600 V.
It is ROHS3 Compliant, which covers the current EU RoHS exemption scope. The UL94 V-0 flammability rating on the PA66 housing satisfies the enclosure-level flame requirement for equipment installed inside a UL-listed panel.