Skip to main content
Log in
Molex 0395321006 — Header Plugs & Sockets

0395321006 Molex Eurostyle ESE 39532 6-Pos 5.08mm

MPN0395321006
Active

Molex Eurostyle ESE 39532, Header, Male Pins, Shrouded (4 Side), 6 positions, 0.200" (5.08mm) pitch, Through Hole, Right Angle, 15 A, 300 V, Tin contacts, Black PA66 housing, Bulk.

$1.7000Ref. price · indicative, final on quote
Molex 0395321006 datasheet (PDF)
RoHSROHS3 Compliant
SeriesEurostyle ESE 39532
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

0395321006 key specifications
ParameterValue
TypeHeader, Male Pins, Shrouded (4 Side)
SeriesEurostyle ESE 39532
MountingThrough Hole
Voltage - UL300 V
Current - UL15 A
Operating temperature-40°C ~ 105°C
ColorBlack
Contact materialBrass
Housing materialPolyamide (PA66), Nylon 6/6
Insulation height0.472\" (12.00mm)
Material flammability ratingUL94 V-0
Pitch0.200\" (5.08mm)

All specifications

0395321006 additional specifications
ParameterValue
PackageBulk
Number of levels1
Termination styleSolder
Header orientation90°, Right Angle
Contact tail length0.150\" (3.81mm)
Positions6
Positions per level6
Contact mating finishTin

Product details

Right-Angle Power Header for Board-Mount Terminal Blocks

The 0395321006: This 6-position, 5.08mm pitch header from the Eurostyle ESE 39532 series mates with the corresponding plug to form a field-wireable terminal block interface on the PCB.

The 5.08mm pitch is wide enough to route a single trace between adjacent pads on a standard two-layer board without necking the trace width. The shrouded (4-side) header design guides the mating plug into alignment and protects the male pins from being bent during handling or blind-mate assembly.

Frequently asked questions

What is the pitch of Molex 0395321006?

The pitch is 0.200" (5.08mm), which is standard for Eurostyle terminal block headers and leaves enough room for trace routing between pads on a typical PCB.

Is 0395321006 a through-hole header?

Yes, it is a through-hole mount header with solder termination — the contact tail length is 0.150" (3.81mm) for the plated through-hole joint.