4-Position 5.08 mm Pitch Plug — 18 A, Screw Clamp
The 0395345004: This is a 4-position plug from the Molex Eurostyle ESE 39534 series, terminated via a screw rising cage clamp. Rated 300 V UL, it suits control panel and industrial equipment wiring where the voltage stays below that ceiling. The 180° wire entry keeps the cable path straight into the clamp — useful when routing wires along a panel backplane.
Termination and Wire Range — 12-30 AWG, 0.56 Nm
Phosphor bronze contact material with tin mating finish gives a corrosion-resistant interface for moderate-cycle applications.
Mating and Mounting — Free-Hanging with Mating Flange
It mates with the corresponding Eurostyle ESE 39534 header (male pins) on the board. The mating flange feature provides a positive lock when screwed to the header — vibration-resistant for field wiring. Single-level design with 4 positions per level. Insulation height is 0.591" (15.00 mm) — check clearance above the header in your enclosure.
Sourcing and Lifecycle — Active, Sourced per RFQ
No official pin-compatible replacement or cross-reference is listed for this part. The base product number is 039534 — use that for family-level searches.