Molex 52806 FPC connector, order code 0528061110, 11 positions, 1.00 mm pitch, 0.5 A, 50 V, tin-plated contacts, through-hole vertical, kinked pin termination.
| Parameter | Value |
|---|---|
| Series | 52806 |
| Mounting | Through Hole |
| Cable end type | Straight |
| Flat flex type | FPC |
| Connector (Contact type) | Contacts, Vertical - 1 Sided |
| Voltage rating | 50V |
| Current rating | 0.5A |
| Operating temperature | -20°C ~ 80°C |
| Contact material | Phosphor Bronze |
| Housing material | Polyphenylene Sulfide (PPS) |
| Height above board | 0.213\" (5.40mm) |
| Material flammability rating | UL94 V-0 |
| Parameter | Value |
|---|---|
| Pitch | 0.039\" (1.00mm) |
| Package | Tray |
| Termination | Kinked Pin |
| Mating cycles | 10 |
| Contact finish | Tin |
| FFC, FCB thickness | 0.30mm |
| Positions | 11 |
The 0528061110 is the 11-circuit member of Molex's 52806 FPC connector line, a vertical through-hole part with tin-plated contacts and kinked pin termination. Rated 0.5 A per contact at 50 V, it accepts 0.30 mm FPC thickness and carries a UL94 V-0 PPS housing.
Rated for 10 mating cycles — the tin-plated phosphor bronze contacts suit low-cycle, cost-sensitive FPC interconnects where gold plating is not required.
The 0528061110 has 11 positions at a 1.00 mm pitch, vertical orientation, accepting 0.30 mm FPC thickness.