Skip to main content
Log in
0541325097 — Molex product photo
Molex

Molex 0541325097 Easy-On FFC/FPC Connector, 50 Pos, 0.50mm

MPN0541325097
Active

Molex Easy-On 54132 FFC/FPC connector, order code 0541325097, 50 positions, 0.020" (0.50mm) pitch, 0.5 A, 50 V, tin bismuth bottom contacts, surface-mount right-angle, solder termination, ZIF slide lock.

$2.9700Ref. price · indicative, final on quote
StockContact for availability
Lead timeIn Stock wk
MOQ1 pcs
  • New & original stockTraceable channels only — no mixed lots, no re-taped reels.
  • Factory packaging where availableSealed reels, trays and bags; cut quantities always stated on the quote.
  • Photo-verified countsEvery line counted and photographed before the box closes.
  • PayPal buyer protectionPay by T/T, PayPal or Payoneer — card payments covered end to end.
How we verify every order →

Specifications

0541325097 Technical Specifications
ParameterValue
SeriesEasy-On 54132
Mounting typeSurface Mount, Right Angle
Cable end typeStraight, Tapered
Flat flex typeFFC, FPC
Connector (Contact type)Contacts, Bottom
Voltage rating50V
Current rating0.5A
Operating temperature-20°C ~ 85°C
Contact materialPhosphor Bronze
Housing materialPolyamide (PA46), Nylon 4/6
Actuator materialPolyphenylene Sulfide (PPS)
Height above board0.079\" (2.00mm)
Material flammability ratingUL94 V-0
Pitch0.020\" (0.50mm)
FeaturesSolder Retention, Zero Insertion Force (ZIF)
PackageTape & Reel (TR) Cut Tape (CT)
TerminationSolder
ManufacturerMolex
Mating cycles20
Contact finishTin Bismuth
Locking featureSlide Lock
FFC, FCB thickness0.30mm
Positions50
Contact finish thickness39.4µin (1.00µm)

Product details

50-position ZIF at 0.50 mm pitch

The 0541325097 is the 50-circuit member of Molex's Easy-On 54132 FFC/FPC connector series, using a ZIF slide-lock actuator and bottom-side contacts. Rated 0.5 A per contact at 50 V, the connector accepts 0.30 mm thick FFC or FPC and mounts surface-mount right-angle with solder retention.

Pitch, height, and FFC thickness

The 0.020" (0.50mm) pitch and 0.079" (2.00mm) height above board set the board footprint and z-height budget; the 0.30 mm FFC thickness is the accepted cable end thickness. The ZIF slide lock secures the FFC without insertion force, and the solder retention pads hold the connector in place during reflow.