The 0873814063: Rated at 1.9 A per contact and 125 V, this connector suits signal-level interconnects in automotive, general-purpose, and telecommunications equipment.
Termination is surface-mount solder, with the connector listed as pick-and-place compatible — the flat top surface and vacuum-pick area allow automated assembly without a separate nozzle adapter. The tube packaging is standard for SMT reflow; if tape-and-reel is required, confirm the packaging option with the base product number 087381. In high-vibration environments, verify that the board-to-board stack height and alignment pins (if present on the mating header) provide sufficient shear resistance.
Lifecycle and Compliance Status
ROHS3 compliance is confirmed, covering the current EU exemption list for lead-free soldering processes.
Mating Header Compatibility
This receptacle mates with Milli-Grid 87381 series pin headers of matching 40-position, dual-row, 2.00 mm pitch layout. The mating header must have square pins (0.50 mm typical) and a push-pull interface — verify the header's insulation height and pin length to achieve the target board-to-board stack height.