Board-side header for CP-6.5 cable assemblies
The 1510482207: This is the board-mount half of a Molex CP-6.5 wire-to-board connection — a 2-position, 2-row header with a 0.256" (6.50 mm) row spacing that matches the mating receptacle's pitch.
With only 2 positions across 2 rows, this header is effectively a single pair of pins spaced 6.50 mm apart center-to-center. The kinked pin termination provides a press-fit retention in the plated through-hole before soldering, holding the component in place during wave solder. The 0.150" (3.81 mm) post length is standard for a 1.6 mm thick PCB — the kink sits below the board surface, and the solder fillet wicks up the pin. The 0.348" (8.85 mm) mating length gives the receptacle contact beam enough wipe distance to establish a clean tin-to-tin interface.
We source this through our multi-distributor network — no stock-holding claim, but we can quote against a firm requirement.