Skip to main content
Molex 1727670106

Molex Mini-Fit TPA2 1727670106, 6-Pos Plug Housing, 4.20mm

MPN 1727670106
Active

Molex Mini-Fit TPA2 172767, plug housing, 6 positions, 2 rows, 4.20mm pitch, panel mount snap-in, locking ramp, crimp termination, glow wire compliant, black PA nylon, -40°C to 105°C.

$1.1200 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
RoHSROHS3 Compliant
IncotermsDAP / DDP Available
SeriesMini-Fit TPA2 172767
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for stock & sourcing questions
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent supplier — new & surplus connector stock· Listing updated Aug 2026

Specifications

1727670106 specifications
ParameterValue
SeriesMini-Fit TPA2 172767
TypeMale Pin
MountingPanel Mount, Snap-In
Connector typePlug
Fastening typeLocking Ramp
Operating temperature-40°C ~ 105°C
ColorBlack
Insulation materialPolyamide (PA), Nylon
NoteContacts Not Included
Pitch0.165\" (4.20mm)
PackageBulk
FeaturesGlow Wire Compliant
Row spacing0.165\" (4.20mm)
Rows2
Contact terminationCrimp
Positions6

Product details

The 1727670106: The key distinction here is the TPA2 terminal position assurance (TPA) feature — a secondary lock that seats over the crimp terminals after they're loaded, giving a positive retention check before the housing is mated.

The BOM line for a mated connector pair needs the 1727670106 plug housing plus the matching male crimp terminals (Molex 44476-1112 or equivalent for 20-24 AWG) and the receptacle side — typically a Mini-Fit TPA2 or standard Mini-Fit Jr. receptacle housing with female terminals. Ordering just the housing and expecting a finished connector is the most common stock-out on this line.

This housing is glow wire compliant, which is relevant for household appliances and similar equipment that must self-extinguish under a glow-wire ignition test.

Mounting and mating — panel fit and locking

The housing mounts to the panel via snap-in retention — no hardware, no threaded insert. The TPA2 secondary lock on the terminal side means each crimp terminal is physically retained even if the primary latch is stressed by wire pull.

MPN
1727670106