Nano-Fit 200277 Plug Housing — What This Is
The 2002771108 mates with the Nano-Fit 200277 right-angle or vertical through-hole headers (e.g., 200277-1xxx series) on the PCB. The housing accepts 20-24 AWG wire depending on the terminal variant. No soldering or special tooling beyond the crimp tool is required, making it field-serviceable. The housing is supplied in bulk packaging, which suits manual assembly or low-to-mid volume harness builds; for automated crimp-and-insert lines, terminals are typically ordered on tape-and-reel separately.
Glow Wire Compliance and Operating Range
The glow wire compliant rating (per IEC 60695-2-11) means the PA66 housing material is tested to resist ignition when exposed to a 850°C glow wire. This is a mandatory requirement for connectors used in household appliances, lighting, and HVAC equipment sold in European and other regulated markets. It does not change the electrical ratings but does affect the material cost and sourcing — not all Nano-Fit housings carry this feature. The housing material retains its mechanical properties across this range, so the latch holder and terminal retention are reliable at temperature extremes.